Much of the drinking water in southeast Los Angeles County comes out of the ground, and the readings below show it tends to be hard. A softener trades the hardness minerals for sodium or potassium ahead of your pipes, and hooking one up is a small, exacting job: bypass valves, a drain path, a dry spot that tolerates salt, and an outlet. A local plumber sizes it and sets it up through us. Describe your home on the price request form and the quote comes back on paper.
Is my local water actually hard?
The answer turns on which utility serves your street, and the published readings differ widely. Whittier's city system reported an average total hardness of 250 mg/L, which is about 14.6 grains per gallon, in its 2025 report. Golden State Water's Norwalk system averaged 310 mg/L, its Artesia system 191, and the La Habra Heights district 309.8 mg/L for 2023.
Pico Rivera's 2023 city report averaged 174.4 mg/L, and Santa Fe Springs reported 260 mg/L for its groundwater that year. For conversion, 17.1 mg/L equals one grain per gallon. Many of these cities have several suppliers, so find the supplier named on your bill and open its newest water quality report. For Downey, Bellflower, Paramount, Hawaiian Gardens and a few others, we have no verified figure, so we do not quote one.
What goes into hooking up a softener?
The plumber places the tank near the main, cuts into the cold supply, and fits a bypass so the system can be isolated. A drain line carries regeneration water away, the brine tank gets salt, and the control head plugs into a nearby outlet. Then the valve is programmed from your hardness reading and the system is tested for leaks.
Where the line splits matters. Ideally the softener comes after the outdoor spigots and before the water heater, so the hose bibs stay on hard water and the heater is protected. In many houses, including the postwar tract homes common in the area, the garage turns out to be the practical spot. Details of this process are in how a softener installation works, and the drain side has its own page on softener drain lines.
Is a softener a do-it-yourself job in California?
Plenty of people try it, since kits arrive with unions and instructions. The limits are legal and practical. State law wants a contractor license once labor and materials reach $1,000 or a permit is involved, and tying into the main supply and a drain is plumbing. A bad solder joint or a missing air gap causes real damage.
The drain connection is the usual mistake. Brine and rinse water must leave through an air gap or a standpipe that the plumbing code accepts, never a tight connection to a waste line. Ask how the connection will be made, and if your city asks for a plumbing permit, ask who pulls it. For permits, the Whittier Building and Safety Division is at (562) 567-9320, and each neighboring city has its own office.
Could my sewer district limit softeners?
State law lets local agencies in some regions restrict or ban residential self-regenerating softeners that discharge brine to the sewer, but only after meeting conditions set out in the Health and Safety Code. Whether your sewer agency has done so is a local question, and we have not verified an answer for each city here.
Phone the city or sewer district before buying and ask if any rule touches softeners. If one does, alternatives include a service exchange tank, where a dealer swaps tanks and regenerates them elsewhere, or a salt-free conditioner, which changes how scale forms rather than removing hardness. Tell the plumber which you prefer so the quote matches. A neighbor's experience in another city does not settle it.
Does one brand install differently from another?
The plumbing is the same in principle for any brand, and manuals differ in the details. Culligan, Kinetico, Whirlpool, Aquasana, Fleck-valve and Clack-valve systems all need a feed, a drain, a bypass and power or a water-driven head. Where they differ is in tank size, programming and rated flow.
Begin with the maker's installation guide, which the plumber follows alongside the plumbing code. If you already bought a unit, tell us the brand and model on the form. If you have not, a plumber can size one to the number of bathrooms, the hardness reading and the peak flow. A shower-head filter is not a softener, since most do not reduce hardness. A "softener loop" is a pre-plumbed section some homes have for a future softener, and a plumber can confirm whether yours has one.
How do I know hard water is the problem?
Look for white crust on faucets, glasses that dry cloudy, a showerhead spraying in odd directions, thin soap lather, and a water heater that rumbles. A test strip or a hardness reading from your water provider confirms it. If the reading is high, a softener is a sensible fix.
Scale also adds up inside pipes and heaters, so a heater that fails early may have been fighting hard water. Read about preventing scale buildup and removing existing scale to learn what a softener will and will not undo. If your water bill jumped after a softener went in, whether a softener can raise a bill explains the regeneration cycle.
What affects the price of installation?
Price follows the unit chosen, the distance to the main and drain, the plumber's access to a garage or utility closet, and any permit. No price is printed on this page because we hold no sourced figure for this area. Look at installation cost and whole-house system cost for the factors, and expect a written quote.
Have the quote split equipment from labor and say who handles the first salt load and startup. Contracts of $500 or more must be written under state rules. A deposit is limited, generally to 10 percent or $1,000 whichever is less, though the CSLB site is the place to confirm current wording. If you plan a tankless heater later, mention it now, because tankless installation shares pipe space. The home page lists the other work we arrange.
Common questions
How much of the day does the work take?
A simple job with easy access can finish within hours. A first-time installation needing new drain routing, an outlet or a longer supply run may eat most of a day. Get the plumber's time estimate up front, along with how long the water will be shut off.
What should I ask a plumber before agreeing to the job?
Find out what the quote covers, how the drain gets handled, whether the outdoor taps stay on hard water, and who programs the hardness and cycle. Ask if a permit applies and who applies for it. Then ask what happens if the unit weeps after startup, and write the answer down.
Is a salt-free conditioner the same thing?
No. A salt-free unit leaves the minerals in the water and alters how they behave so they scale less, while a true softener pulls them out. Salt-free models need no drain, which helps where sewer rules limit brine, yet the water still tests hard and soap lathers as poorly as before.
Does softened water affect people on a low-sodium diet?
Salt-based units put a modest amount of sodium into the water. A person on a medically restricted sodium diet should check with a doctor. Potassium can replace the salt in some systems, and a kitchen drinking tap can stay unsoftened if the plumber leaves a separate cold line.
In this section
- Water softeners and treatment
A working softener adds little water, but a stuck valve or a drain leak can double usage.
- Hard water scale prevention
Stop the white crust before it forms. How hardness is measured in ppm and grains, what causes scale, and which fixes work in Whittier's…
- Water softeners and treatment
What a water softener install involves, which steps are DIY-friendly, how hard Whittier-area water is, and how to clear scale while you…
- Removing hard water scale
How to dissolve scale from faucets, showerheads, glass, kettles and the water heater, which cleaners are safe on which surfaces and when…
- Salt based water softener
What a salt based water softener installation involves: sizing by local hardness, placement, drain and bypass, setup.
- Costs
Water softener installation prices as a guide: the unit, the plumbing around it, what makes Whittier jobs cost more, and a worksheet for…
- Whole house water softener
What a whole house water softener costs installed, by type, plus salt, upkeep and plumbing extras, with measured hardness for Whittier and…
References
- City of Whittier 2025 Consumer Confidence Report (Water System CA1910173)
- Golden State Water, Norwalk water quality report 2025
- Golden State Water, Artesia water quality report 2025
- La Habra Heights County Water District, water hardness
- City of Santa Fe Springs 2023 Annual Water Quality Report
- Pico Rivera Consumer Confidence Report (2023)
- California Health and Safety Code sections 116775 to 116795, water softeners
- Contractors State License Board