Skip to content
Ring (562) 647-6550

Service ยท Whittier

Emergency plumber in Whittier

Water you cannot stop, a gas smell or sewage rising in the floor drain are emergencies. Here is what to do in the first ten minutes, what an urgent visit tends to cost and how to ask for one.

Last changed

Ask for a quote

Cutaway of a house showing where the main shutoff valve sits on the service line.

Smell gas? Exit now. Outside the building, the number for SoCalGas is 1-800-427-2200. Injury or possible fire? Dial 911 before anything else. Water gushing? Close the main, then call us. A slower problem keeps until the line opens. You can begin at the home page or send details through this request form; a local plumber then makes the trip to you in Whittier or a neighboring city.

What is worth an urgent call?

Three situations: runaway water, sewage rising into the house and any whiff of gas. A split supply line, a water heater leaking from the tank seam, a ceiling bowing under trapped water and floor drains gurgling up brown water all fit. A dripping tap or a lazy drain does not.

Three stacked bars ranking urgent plumbing problems from gas smell to next-opening repairs.

A rough sort, from most to least urgent:

  • Gas first: a rotten-egg smell, a hiss near a line or appliance. Leave, then call SoCalGas.
  • Plumber now: a spraying pipe, a valve that won't budge, sewage in the shower or tub.
  • Plumber at the next opening: no hot water, one toilet that will not flush while the others work, weak pressure at a single faucet.

Can't place yours? Describe the scene by phone or in the quote form and we'll sort it into one of those groups.

What should happen before anyone arrives?

Close the main shutoff, kill power to the water heater and clear the soaked area. The main valve is wherever the service line surfaces: frequently by a front-yard spigot, a garage wall or the meter box out at the curb. A round wheel closes clockwise. A lever closes by swinging across the pipe.

After that, in this order:

  1. Open whichever faucet sits lowest and let it run dry, which eases pressure on the broken section.
  2. An electric heater goes off at the breaker. A gas heater has a dial on its gas valve; set it to pilot or off.
  3. Stay out of water that touches outlets, cords or appliances. Water and current together can kill. Leave the breaker panel alone unless your feet are on a dry floor.
  4. Photograph everything wet before you clean, because the insurer will ask.
  5. Mop, towel or wet-vac what you can reach. Drywall and underlayment start to go bad inside a day or two.

The pipe burst signs guide helps when the water has gone but you suspect damage in a wall, and leak help covers repair once it is shut off.

What will an urgent visit cost?

As a guide, Thumbtack's national figures put an urgent plumbing visit between about $215 and $655, with $377 the most common bill, and an hourly rate of roughly $90 to $147. Night work can approach twice the daytime hourly rate. Prices in Los Angeles County may differ from national averages, so use these only to compare quotes.

What changes the bill Why
Clock time Late nights, weekends and holidays are pricier
Pipe location Inside a tiled wall or beneath concrete means more labor
What failed A $20 valve versus a whole water heater
Permit Some repairs need city sign-off and a fee

Before the wrench comes out, find out what the call-out fee includes, the hourly rate and any minimum. A bigger repair deserves a written number first. The plumber cost guide prices the usual jobs one by one.

Is anyone available at 2am?

Someone answers our phone weekdays only, 9am to 5pm. A request sent online at other times waits until the next morning shift of the line. We do not run a night dispatch desk, so I will not promise one. With water dripping through a ceiling at 2am, the main valve is the fix until morning.

Two things hold true for after-hours plumbing from any company:

  • The premium is real, and some firms announce a flat dispatch charge before they drive over. Get it quoted before you agree.
  • A temporary measure, like capping a line or isolating one fixture, is frequently much cheaper than a complete repair at midnight. The lasting repair can follow in daylight.

If your house has a history of trouble, think ahead: locate the main, tag it with tape and check that everyone living there can reach it.

How can you recognize a plumber who pads the bill?

Watch for someone who dodges a written price, asks for the bulk of the payment before starting or has no contractor license number to give. License rules in California start once a job's labor and parts total $1,000, and permit work needs one at any price. The state licensing board (CSLB) lets anyone search a number online.

Reasons to end the conversation:

  • A phone price that rises as soon as the truck pulls up.
  • Pushing a full replacement when a part would do.
  • No written contract for work above $500, which California requires.
  • A deposit bigger than the state cap. The state puts a ceiling on deposits (generally $1,000 or 10 percent, the lower one), so check CSLB's current rule before handing over money.
  • Payment in cash with no invoice.

Where do you find an honest plumber?

Before you agree, collect three items: a license number, a quote in ink and the name of whoever will pull the permit. Then run the number through CSLB's lookup. An honest plumber shows you the worn part, says what is optional and does not mind you comparing a second price when nothing is flooding.

We put those same standards in front of the businesses we send out: a quote on paper, a repair described in ordinary words and a permit pulled whenever the city wants one. Our about page lays out the setup, and the form just below opens your quote.

Book a plumber quote

Fill this in and we'll arrange a local plumber specialist to come and price the job.

Lets the business see where the job is before they quote.

We earn a referral fee from the plumber who takes your job. You pay us nothing.

Common questions

What do plumbers do?

Plumbers handle everything that moves clean water into a building and waste out: supply pipes, drains, toilets, faucets, water heaters, gas piping and backflow assemblies. California requires a contractor license for it, and permitted jobs get an inspection from the city.

What is a plumbing engineer?

A plumbing engineer designs the plumbing for bigger buildings: pipe sizes, pressure, drainage, fire protection and gas distribution. You almost never need one for a house. The plumber builds or fixes the system; the engineer draws it for commercial or multi-unit projects, normally under a registered professional engineer's stamp.

Does a "135 rule" exist for plumbers?

The California Plumbing Code does not use that label, nor does any official source I read, so I won't make up a definition. It could be one outfit's shorthand. Should a contractor use it, request the section number in writing and read the section before paying.

Can a shower and toilet share the same drain?

Often they can. In one bathroom, a shower and a toilet commonly empty into a shared branch that runs to the main drain, when every fixture keeps a separate trap and the drain is correctly vented and sized. Your house's age and layout decide the details, so have the plumber look first.

What is a dirty arm in plumbing?

I could not confirm "dirty arm" as a defined term in the plumbing code, so treat it as trade slang until someone proves otherwise. If it appears on an estimate, have the contractor name the exact pipe and fault in everyday words. A solid quote always says which pipe and what the repair is.

What is the biggest hazard for plumbers?

No official source I checked ranks a single cause. Documented hazards in the trade include trench collapse, falls, burns from hot water and torches, and exposure to sewer gas, asbestos or lead in older buildings. That is partly why gas lines and main line work are left to professionals, and why you should leave them alone.

References