Skip to content
Ring (562) 647-6550

Guide ยท Whittier

How to reset an earthquake gas shut off valve

A tripped earthquake valve means your gas is off for a reason. Here is the safe order of checks, who is allowed to touch what, and when to hand the job to a plumber.

Last changed

Gas line schematic running from the meter through the earthquake valve to three appliance valves.

Once the shaking stops, the shutoff mounted on your gas line has already done its work. Reset it only once the house has no gas odor and no visible damage, and follow the instructions printed on the valve itself. The moment gas is detectable by smell, you leave and ring SoCalGas from outdoors. The gas line plumber page covers gas work as a whole.

Can a homeowner reset it without help?

It can be, provided nothing smells, nothing looks damaged and the manufacturer's steps are on the device. SoCalGas states that owners may follow those steps, and it still recommends SoCalGas or a qualified professional do the reset, test appliances for leaks and relight pilots. If anything feels uncertain, call.

Do not confuse the two valves. Yours is the earthquake valve fitted to the house piping at the meter. The meter's own service valve is SoCalGas's, and only SoCalGas field employees reopen it. If you closed the meter yourself after the shaking, it stays closed until they arrive.

What should you inspect before touching the reset?

Look and listen first, then confirm the valve really did trip. A smell or a hiss ends the exercise. If the house is quiet, walk the property for a cracked pipe, a flex connector yanked loose behind the range or dryer, and a water heater knocked off its pad.

Work through this list:

  1. No odor, no hissing, no obviously broken fittings.
  2. Shut the small valve at every gas appliance, so no burner gets gas it cannot light.
  3. Inspect the water heater strapping and the flex connectors for strain.
  4. Read the valve's indicator. Many show red when tripped and green when set.

How does a typical reset go?

Models differ, and the manual on the valve takes priority. Some caged-ball designs reset with a magnetic wand held outside, others with an internal lift lever. One California design has a reset cam you turn until the indicator flips from red to green, and then you reopen the manual shutoff ahead of it.

The sequence PNNL's guide outlines: verify no odor or damage, close the manual shutoff upstream and every appliance valve, reset per the instructions, reopen the shutoff, and test joints for leaks. Relight pilots by each appliance's own directions. If a pilot keeps going out, or you catch any odor, shut everything off again and phone a plumber or SoCalGas.

A match or lighter is never a leak test. Plumbers use an electronic detector or soapy solution on the joints.

Who do you call, SoCalGas or a plumber?

Call SoCalGas if you closed the meter, or if the valve refuses to reset and trouble may lie on the utility side. Call a plumber when the valve resets but appliances stay dark, when pipes look damaged, or when you want someone to pressure test the house line and relight each pilot.

Split drawing: the meter valve belongs to the gas utility, while the house piping belongs to a plumber.

After a widespread quake, expect waits. SoCalGas warns that restoration can take an extended period and that interior piping must be inspected before service returns safely. A plumber can inspect house piping in the meantime, but cannot touch the meter valve.

A valve that trips with no earthquake may be mounted out of level, too sensitive for its location, or responding to a true pressure fault. Have a plumber level or replace it rather than defeating it.

What does installing a seismic valve involve?

A plumber mounts the unit on the house line at the meter, checks joints for leaks and sets the mechanism. The Division of the State Architect, a state agency, approves the models sold in California, and certain cities want a permit for each installation. Ask for the permit answer in writing ahead of any work.

This is regulated gas work and not a weekend project. In Whittier the permit counter is the Building & Safety Division, while each nearby city runs its own, all listed under service areas. Compare approaches in earthquake shutoff valve guidance.

Price turns on the valve model, line size, meter access and any permit fee. We won't quote one blind. Gas line costs lists the drivers, and a written price is one form away.

What should you set up before the next quake?

Prepare while things are calm. Find the gas meter and the shutoff at every appliance, and make sure each moves without a fight. Write the SoCalGas number where the household can find it, and keep the valve's manual taped inside a cabinet door, since the reset steps are specific to the model.

Walk the house with the failure points in mind: flex connectors behind the range and dryer that are kinked or crusty, and a tank heater left unstrapped, a topic in water heater repair. A strapped heater and sound connectors keep a shaking event from becoming a gas event. If a connector looks old or cracked, have a plumber replace it, which is routine work and cheaper than a repair after damage.

If your meter has no earthquake valve, ask a plumber which approved models suit your line and what the city expects for the permit. Households in older Whittier, Downey and Norwalk neighborhoods often have gas lines that predate any seismic device, so it is a reasonable question to raise on any visit.

Common questions

What is the reset process after an earthquake trips the valve?

Make sure there is no gas smell, close the appliance valves, reset with the maker's method (a magnet, lever or cam, often with a red-to-green indicator), reopen the shutoff and test joints. If any step feels uncertain, stop there and ask SoCalGas or a plumber to take over.

Where does the earthquake valve mount?

Typically after the meter, sitting between the utility's equipment and the pipes serving the building. Don't mix it up with an excess flow valve, which the utility buries on the service line ahead of the meter. Owners don't install those.

What approval does an earthquake-actuated shutoff valve need?

In California the state architect's division certifies the valves, and local building offices may add their own rules, such as a permit. Have the installer give you the model name and its approval listing, then keep both with the house papers.

What is the Northridge connection in these searches?

The January 1994 Northridge quake put seismic valves on Southern California homeowners' radar, and the wording stuck in searches. It is not a brand name. What matters is a California-approved model, put in by a contractor with a state license, with the permit sorted out.

Is SoCalGas going to reset the valve?

The utility lets owners use the maker's reset steps, though it would rather it or a qualified professional do the reset and the appliance check. Crews may be stretched thin after a major quake, so a plumber could be faster for house piping. The meter itself is opened only by SoCalGas.

References